This offer was designed to serve the small office with about 5 users, including mobile users who need access to the network resources from wherever they may find themselves..
You can examine the details of this package in the Offer Definition section below. For your convenience, we provide here a view at a glance:
A Unified Threat Management (UTM) unit, the NetGear ProSecure UTM5, that is provided with a Stateful Packet Inspection (SPI) Firewall, an Intrution Prevention System (IPS), anti-virus, anti-spam and web filtering software, as well as IPSec and SSL Virtual Private Network (VPN) capabilities. Control of Instant Messaging (IM) and Person-to-Person (P2P) applications is also included.
A Wireless Access Point, the NetGear WNAP210, that implements the IEEE 802.11b/g/n standards, running in the 2.4 GHz band, to support wireless computers with the new 802.11n cards (2.4 GHz) and legacy devices with 802.11g and 802.11b/g cards.
A Power-over-Ethernet Injector, the ORiNOCO 1-port 4401-US injector, to provide electrical power to the wireless Access Point over the data wire thereby avoiding costly electrical wiring installation.
Our In-house and Remote Customization (INneR).
1. Needs Assessment. A Preliminary Needs Assessment Questionnaire is provided to help you determine what solution is the best response to your needs. If Secure 1 is selected, you may place an order and we will send you the Detailed Needs Assessment Questionnaire to gather the information necessary to customize the products according to your needs.
2. Equipment.
a) One NetGear ProSecure UTM5 Unified Threat Management appliance, with 1 year web protection, e-mail protection and NetGear maintenance. Product Code UTM10EW-100NAS. To view the product description click here. For a comparison table of the various UTM models, click here.
b) One NetGear WNAP210 Wireless Access Point supporting wireless clients with IEEE 802.11n wireless interfaces in the 2.4GHz frequencies and the legacy 802.11b/g cards. Product Code WNAP320-100NAS. To view the product description click here.
c) One Proxim ORiNOCO 4401-US single-port power injector that implements the IEEE 802.3af Power-over-Ethernet standard. Product Code 4401-US. To view the prouct description, click here.
3. In-house Customization. This service starts with the ordering and procurement of the equipment included in this package. Once the products are in WaveTeam's lab the following services will be performed:
For the UTM5:
- License activation and product registration.
- Update firmware if necessary.
- Network configuration according to the needs assessment data.
- Reserved IP addresses for the servers identified in the needs assessment.
- Activation of Intrusion Prevention System (IPS) for web, email, databases and malware.
- Creation of Schedule 1 for business days, 8-5 (future use).
- Creation of Schedule 2 for Mon-Sat, 8-5 (future use).
- Creation of Schedule 3 for weekends (future use).
- Attack checks for ping on internet ports and enable stealth mode.
- Application Security applied to Services identified in the needs assessment.
- Append warnings on e-mails as identified in the needs assessment.
- Distributed Spam Analysis applied to SMTP and POP3.
- Content Filtering by category, as specified in the needs assessment.
- Trusted Hosts list as specified in the needs assessment.
- Establish IP range for SSL VPN clients.
- Configured Client Route for destination network.
- Establish user profiles for administrator, guest and SSL VPN users, according to the needs assessment.
- Enable HTTPS for remote administration.
- Enable SNMP if requested by the customer in the needs assessment.
- Set the unit to the customer's time zone and activate automatic adjust for Daylight Savings Time.
- Switch to a different NTP server if one is provided by the customer in the needs assessment.
- All other UTM options left with default values.
For the WNAP210:
- License activation and registration of the WNAP210.
- Network configuration according to the needs assessment
- Activation of WAP2 security with pre-established encryption key.
- Activation of wireless mode .11gn for new and legacy mobile devices.
- Deactivation of DHCP server to allow the UTM to be the sole DHCP server on the network.
- Connectivity testing with the customized UTM and the ethernet switch.
- Connectivity testing with mobile devices.
For the 4401-US Injector:
- Connectivity testing with the WNAP210
Site Preparation:
- Site Preparation instructions are provided with the above products, typically including Internet access requirements, equipment room and wiring recommendations, power requirements and distance considerations.
- A Port Allocation Table is also provided to facilitate the connection of the various components.
This phase ends with the shipment of all customized products to your designated location for connection to the electrical power and to the network as specified in the accompanying documentation.
4. Remote Assistance for the Network Administrator. Once all equipment is at your location, a 1 1/2 -hour session will be held on-line and on the telephone with the network administrator, as follows:
- Confirm with the administrator that all components of this solution have been connected and activated according to the provided instructions.
- Make the administrator aware of the characteristics of the network as designed under this offer.
- Remote access of adminstrator's Windows PC by WaveTeam technician for hands-on instructions.
- Review of administrator's tasks to monitor the UTM functioning.
- Review of procedures to add or delete authorized VPN users.
- Review user-friendly practices for the SSL VPN users.
- Review of procedures to add or delete filtered catagories.
- Review of procedures to add or delete services to be scanned or blocked.
- Review of procedures to enable the DMZ port of the UTM
- Review of procedures to add or delete digital certificates.
- Review of procuderes to monitor the functioning of the wireless access point.
- Review of procedures to change the WAP2 options of the wireless access point.
- Review of procedures to monitor the functioning of the ethernet switch.
- Review of procedures to add or delete hosts connected to the ethernet switch.
- Make the administrator aware of the support resources available for the included equipment.
5. Remote Assistance to SSL VPN Users, as follows:
- Remote Assistance (RA) will be provided for up to 2 SSL VPN users at an established time following activation of the system.
- The Remote Assistance service takes about 20 minutes per user.
- At WaveTeam's discretion, remote access of the user's PC by the WaveTeam technician may be required.
- It will include the necessary procedures to establish the VPN tunnel with the UTM and to locate the targeted shared resources according to the needs assessment.
6. Pricing. All equipment and services listed in this Service Offering are included in the price shown here:
Equipment Services Total before Sales Tax
S & H with In-house Customization Grand Total before Tax
Copyright © 2011, WaveTeam, LLC. All rights reserved.